restructured
This commit is contained in:
nightflyer88
parent
6cc51bb9ef
commit
97a86ec26d
13
CG_scale.ino
13
CG_scale.ino
|
|
@ -71,6 +71,12 @@
|
|||
|
||||
*/
|
||||
|
||||
// **** Please UNCOMMENT to choose special hardware *****************
|
||||
|
||||
//#define WIFI_KIT_8 //is a ESP8266 based board, with integrated OLED and battery management
|
||||
|
||||
// ******************************************************************
|
||||
|
||||
// Required libraries, can be installed from the library manager
|
||||
#include <HX711_ADC.h> // library for the HX711 24-bit ADC for weight scales (https://github.com/olkal/HX711_ADC)
|
||||
#include <U8g2lib.h> // Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
||||
|
|
@ -97,7 +103,11 @@
|
|||
#if defined(__AVR__)
|
||||
#include "settings_AVR.h"
|
||||
#elif defined(ESP8266)
|
||||
#include "settings_ESP8266.h"
|
||||
#ifdef WIFI_KIT_8
|
||||
#include "settings_WIFI_KIT_8.h"
|
||||
#else
|
||||
#include "settings_ESP8266.h"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// HX711 constructor array (dout pin, sck pint):
|
||||
|
|
@ -359,7 +369,6 @@ void handleTareBtn() {
|
|||
} else {
|
||||
tareBtnCnt++;
|
||||
if (tareBtnCnt > 10) {
|
||||
Serial.println("tare button pressed");
|
||||
printOLED("TARE ==>", " tare load cells ...");
|
||||
// avoid keybounce
|
||||
tareBtnCnt = -1000;
|
||||
|
|
|
|||
|
|
@ -124,3 +124,8 @@ U8G2_SH1106_128X64_NONAME_1_HW_I2C oledDisplay(U8G2_R0, /* reset=*/ U8X8_PIN_NON
|
|||
|
||||
// Battery cells
|
||||
#define BAT_CELLS 2
|
||||
|
||||
|
||||
|
||||
// **** end of settings ****
|
||||
#warning AVR settings have been loaded
|
||||
|
|
|
|||
|
|
@ -45,35 +45,15 @@ CG scale with 3 Loadcells:
|
|||
*/
|
||||
|
||||
|
||||
#define PIN_LOADCELL1_DOUT D6
|
||||
#define PIN_LOADCELL1_PD_SCK D5
|
||||
|
||||
// Wifi Kit 8 (https://heltec.org/project/wifi-kit-8/)
|
||||
// is a ESP8266 based board, with integrated OLED and battery management
|
||||
#define WIFI_KIT_8 1
|
||||
#ifdef WIFI_KIT_8
|
||||
#define PIN_LOADCELL1_DOUT D6
|
||||
#define PIN_LOADCELL1_PD_SCK D7
|
||||
|
||||
#define PIN_LOADCELL2_DOUT D3
|
||||
|
||||
#define PIN_LOADCELL2_PD_SCK D8
|
||||
|
||||
#define PIN_LOADCELL3_DOUT D0
|
||||
#define PIN_LOADCELL3_PD_SCK D0
|
||||
#define PIN_LOADCELL2_DOUT D2
|
||||
#define PIN_LOADCELL2_PD_SCK D1
|
||||
|
||||
// D3 can be used in parallel to the load cell with Wifi Kit 8
|
||||
#define PIN_TARE_BUTTON D3
|
||||
#define PIN_LOADCELL3_DOUT D7
|
||||
#define PIN_LOADCELL3_PD_SCK D0
|
||||
|
||||
#define MAX_SSID_PW_LENGHT 64
|
||||
#else
|
||||
#define PIN_LOADCELL1_DOUT D6
|
||||
#define PIN_LOADCELL1_PD_SCK D5
|
||||
|
||||
#define PIN_LOADCELL2_DOUT D2
|
||||
#define PIN_LOADCELL2_PD_SCK D1
|
||||
|
||||
#define PIN_LOADCELL3_DOUT D7
|
||||
#define PIN_LOADCELL3_PD_SCK D0
|
||||
#endif
|
||||
|
||||
|
||||
// **** Measurement settings ****
|
||||
|
|
@ -101,13 +81,8 @@ CG scale with 3 Loadcells:
|
|||
|
||||
// Please UNCOMMENT the display used
|
||||
|
||||
#ifdef WIFI_KIT_8
|
||||
// Wifi Kit 8 has a fixed wired 128x32 display
|
||||
U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C oledDisplay(U8G2_R0, /* reset=*/ 16, /* clock=*/ 5, /* data=*/ 4);
|
||||
#else
|
||||
U8G2_SH1106_128X64_NONAME_1_HW_I2C oledDisplay(U8G2_R0, /* reset=*/ U8X8_PIN_NONE, /* clock=*/ D3, /* data=*/ D4);
|
||||
//U8G2_SSD1306_128X64_NONAME_1_HW_I2C oledDisplay(U8G2_R0, /* reset=*/ U8X8_PIN_NONE, /* clock=*/ D3, /* data=*/ D4);
|
||||
#endif
|
||||
U8G2_SH1106_128X64_NONAME_1_HW_I2C oledDisplay(U8G2_R0, /* reset=*/ U8X8_PIN_NONE, /* clock=*/ D3, /* data=*/ D4);
|
||||
//U8G2_SSD1306_128X64_NONAME_1_HW_I2C oledDisplay(U8G2_R0, /* reset=*/ U8X8_PIN_NONE, /* clock=*/ D3, /* data=*/ D4);
|
||||
|
||||
|
||||
// **** Voltage measurement settings ****
|
||||
|
|
@ -153,9 +128,7 @@ CG scale with 3 Loadcells:
|
|||
|
||||
// **** Wifi settings ****
|
||||
|
||||
#ifndef MAX_SSID_PW_LENGHT
|
||||
#define MAX_SSID_PW_LENGHT 32
|
||||
#endif
|
||||
|
||||
// Station mode: connect to available network
|
||||
#define SSID_STA "myWiFi"
|
||||
|
|
@ -187,3 +160,8 @@ const char ip[4] = {1,2,3,4}; // default IP address
|
|||
#define DEFAULT_NAME "Model" // default model name
|
||||
#define MODEL_FILE "/models.json" // file to store models
|
||||
#define JSONDOC_SIZE 20000 // max file size in bytes
|
||||
|
||||
|
||||
|
||||
// **** end of settings ****
|
||||
#warning ESP8266 settings have been loaded
|
||||
|
|
|
|||
|
|
@ -0,0 +1,173 @@
|
|||
/*
|
||||
-----------------------------------------------------------
|
||||
Settings for WIFI KIT 8 (ESP8266) board
|
||||
-----------------------------------------------------------
|
||||
General settings for the CG scale.
|
||||
|
||||
Wifi Kit 8 (https://heltec.org/project/wifi-kit-8/)
|
||||
is a ESP8266 based board, with integrated OLED and battery management
|
||||
*/
|
||||
|
||||
// **** Loadcell hardware settings ****
|
||||
|
||||
#define NUMBER_LOADCELLS 3 // if set to 2, the parameters of loadcell 3 are ignored
|
||||
|
||||
#define DISTANCE_X1 30 // mm
|
||||
#define DISTANCE_X2 350 // mm
|
||||
#define DISTANCE_X3 220 // mm
|
||||
|
||||
#define LOADCELL1_CALIBRATION_FACTOR 900 // user set calibration factor
|
||||
#define LOADCELL2_CALIBRATION_FACTOR 900 // user set calibration factor
|
||||
#define LOADCELL3_CALIBRATION_FACTOR 900 // user set calibration factor
|
||||
|
||||
/*
|
||||
CG scale with 2 Loadcells:
|
||||
|
||||
|
||||
<- ||=== Loadcell 1 ========== Loadcell 2
|
||||
|
||||
| | |
|
||||
|---X1---|---------X2----------|
|
||||
|
||||
|
||||
|
||||
CG scale with 3 Loadcells:
|
||||
|
||||
-- || Loadcell 1
|
||||
| || ||
|
||||
| || ||
|
||||
| || ||
|
||||
<- X3 || ||================ Loadcell 2
|
||||
| || ||
|
||||
| || ||
|
||||
| || ||
|
||||
-- || Loadcell 3
|
||||
|
||||
| | |
|
||||
|---X1---|---------X2----------|
|
||||
*/
|
||||
|
||||
|
||||
|
||||
#define PIN_LOADCELL1_DOUT D6
|
||||
#define PIN_LOADCELL1_PD_SCK D7
|
||||
|
||||
#define PIN_LOADCELL2_DOUT D3
|
||||
|
||||
#define PIN_LOADCELL2_PD_SCK D8
|
||||
|
||||
#define PIN_LOADCELL3_DOUT D0
|
||||
#define PIN_LOADCELL3_PD_SCK D0
|
||||
|
||||
// D3 can be used in parallel to the load cell with Wifi Kit 8
|
||||
#define PIN_TARE_BUTTON D3
|
||||
|
||||
|
||||
|
||||
// **** Measurement settings ****
|
||||
|
||||
#define STABILISINGTIME 3000 // ms
|
||||
|
||||
#define UPDATE_INTERVAL_OLED_MENU 500 // ms
|
||||
#define UPDATE_INTERVAL_LOADCELL 100 // ms
|
||||
|
||||
#define SMOOTHING_LOADCELL 0.4 // IIR filter: smoothing value from 0.00-1.00
|
||||
|
||||
#define MINIMAL_CG_WEIGHT 10 // g if lower, no CG is displayed (0mm)
|
||||
#define MINIMAL_TOTAL_WEIGHT 1 // g if lower, weight = 0 is displayed
|
||||
|
||||
|
||||
|
||||
// **** Calibration settings ****
|
||||
|
||||
#define REF_WEIGHT 1500 // g
|
||||
#define REF_CG 100 // mm
|
||||
|
||||
|
||||
|
||||
// **** Display settings ****
|
||||
|
||||
// Wifi Kit 8 has a fixed wired 128x32 display
|
||||
U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C oledDisplay(U8G2_R0, /* reset=*/ 16, /* clock=*/ 5, /* data=*/ 4);
|
||||
|
||||
|
||||
// **** Voltage measurement settings ****
|
||||
|
||||
// analog input pin
|
||||
#define VOLTAGE_PIN A0
|
||||
|
||||
// supply voltage
|
||||
#define V_REF 3300 // set supply voltage from 1800 to 5500mV
|
||||
|
||||
// voltage divider
|
||||
#define RESISTOR_R1 20000 // ohm
|
||||
#define RESISTOR_R2 10000 // ohm
|
||||
|
||||
/*
|
||||
voltage input
|
||||
|
|
||||
|
|
||||
| |
|
||||
| | R1
|
||||
| |
|
||||
|
|
||||
analog Pin <------+
|
||||
|
|
||||
| |
|
||||
| | R2
|
||||
| |
|
||||
|
|
||||
|
|
||||
GND
|
||||
*/
|
||||
|
||||
// calculate voltage to percent
|
||||
#define ENABLE_PERCENTLIST true
|
||||
|
||||
// Battery type
|
||||
#define BAT_TYPE B_VOLT
|
||||
|
||||
// Battery cells
|
||||
#define BAT_CELLS 2
|
||||
|
||||
|
||||
|
||||
// **** Wifi settings ****
|
||||
|
||||
#define MAX_SSID_PW_LENGHT 64
|
||||
|
||||
// Station mode: connect to available network
|
||||
#define SSID_STA "myWiFi"
|
||||
#define PASSWORD_STA ""
|
||||
#define TIMEOUT_CONNECT 25000 //ms
|
||||
|
||||
// Access point mode: create own network
|
||||
#define SSID_AP "CG scale"
|
||||
#define PASSWORD_AP ""
|
||||
const char ip[4] = {1,2,3,4}; // default IP address
|
||||
|
||||
#define ENABLE_MDNS true // enable mDNS to reach the webpage with hostname.local
|
||||
#define ENABLE_OTA true // enable over the air update
|
||||
|
||||
|
||||
|
||||
// **** https update settings ****
|
||||
|
||||
#define ENABLE_UPDATE true
|
||||
#define HTTPS_PORT 443
|
||||
#define HOST "github.com"
|
||||
#define URL "/nightflyer88/CG_scale/releases/latest"
|
||||
|
||||
|
||||
|
||||
// **** Model memory settings ****
|
||||
|
||||
#define MAX_MODELNAME_LENGHT 32 // max chars
|
||||
#define DEFAULT_NAME "Model" // default model name
|
||||
#define MODEL_FILE "/models.json" // file to store models
|
||||
#define JSONDOC_SIZE 20000 // max file size in bytes
|
||||
|
||||
|
||||
|
||||
// **** end of settings ****
|
||||
#warning WIFI KIT 8 settings have been loaded
|
||||
Loading…
Reference in New Issue